Not Logged on
[Register] [Logon] 
Section Image Font Size AdjusterDecrease Font SizeIncrease Font Size  

Rust treatment

Submitted: Thursday, Feb 21, 2008 at 09:21

Rainman WA

Article Overview - Vehicle Care
This article outlines options for prolonging the life and looks of your vehicle - especially one that is used for outback travelling where it is subjected to temperature extremes, excessive dust, dirt, mud and even salt water. View Full Article...
I need to do some work on my camper trailer as it got badly stone blasted on our last trip and now has a lot of surface rust.

In general, whats the best for this type of situation, applying a rust converter or rubbing the rust off and applying cold gal?

I see all cold gal products state specifically not to use a rust converter prior to application of the cold gal, which is a bit of a bugger as applying both would seem to be the best of both worlds.
Member: My Profile
Advertisement
ThreadID: 54779 Replies: 6
Views: 978 FollowUps: None
This Thread has been Archived
Thread Summary

AnswerID: 288607   Submitted: Thursday, Feb 21, 2008 at 11:18

Member -Signman replied:

If you use a rust converter- ensure the residue is totally washed and cleaned off before applying anything over it...
F_TROOPY
Click Image to Enlarge
Each morning I seize the day...
but by mid afternoon it has escaped!
Signman- NSW
VKS737 R3364 Selcall3364
Amateur Callsign: VK2EZY
Member: My Profile
Reply 1 of 6
AnswerID: 288615   Submitted: Thursday, Feb 21, 2008 at 12:14

Member - Mike DID replied:

The cold-galvanising ONLY works if it's in direct contact with the steel.

To be effective you must coat the cold-gal with a primer designed to go on bare metal (which the zinc is) or bituminous paint.

Our gutter stays wet for long periods due to leaf litter collecting in it and a few patches had started to rust because the zinc had worn away. I wire-brushed to bright steel, painted with cold-galvanising, then painted with bituminous paint. Ten years later that gutter is still going strong !
Mike R
Member: My Profile
Reply 2 of 6
AnswerID: 288619   Submitted: Thursday, Feb 21, 2008 at 13:09

Moose replied:

Just keep travelling and the stone blasting keeps the rust at bay:-)
Reply 3 of 6
AnswerID: 288624   Submitted: Thursday, Feb 21, 2008 at 13:43

Member - bungarra (WA) replied:

Galmet make a product that is a rust converter.

You then use another Galmet product that paints over that skin the rust converter created. To the layman afterwards it looks as though it was coated with coldgalv.

We use it in sheds with a high corrosive atmosphere and just finished doing so to some trusses. So far it seems an excellent product.


Click Image to Enlarge
Life is a journey, it is not how we fall down, it is how we get up.
Member: My Profile
Reply 4 of 6
AnswerID: 288634   Submitted: Thursday, Feb 21, 2008 at 15:54

Member - Kiwi Kia replied:

Rust has roots. It can tunnel in a little as well as along the surface. Thats one of the reasons a modern rust converter is worth while as it kills and then encapsulates the rust all in one coat. I use a Turgo product called Black Guard, goes on white, gets a bluish tinge then drys black - hard as !
Member: My Profile
Reply 5 of 6
AnswerID: 288748   Submitted: Thursday, Feb 21, 2008 at 22:30

Trekkie (Member - WA) replied:

I have found that often the red dust gets ito all the nooks and crannies and looks like there is more rust than actually exists. I have used Ranex for years without any detriment. When applied it almost makes things look like new. I always dilute it quite a bit. I have used a spray bottle or small paint brush and when the rust has disappeared I use my hi pressure cleaner to remove all the surplus.

Check it on the Internet - You can get it at Bunnings

RANEX RUSTBUSTER
Description:

Ranex Rustbuster converts rust from a detrimental oxide to a phosphate of iron, thus prolonging the life of the metal and paint.

Features & Benefits:

•Penetrates deep to convert and chemically destroy rust
•Removes surface rust, cleans and brightend polished surfaces
•Removes ugly rust and bore water stains
•Cleans boats, polishes stainless steel fittings

Sizes:

250ml, 500ml, 1L, 4L, 20L

Download Datasheet:

DS Ranex Rustbuster (76 kb)

Worf Son of Mogh
Click Image to Enlarge
Trekkie
Beam me up Scottie !!!
Member: My Profile
Reply 6 of 6