Not Logged on
[Register] [Logon] 

Click Image to Enlarge
 		Section Image Font Size AdjusterDecrease Font SizeIncrease Font Size  

Suspension

There is an unfortunate but realistic fact about purchasing a new 4WD - it won't come fitted with a suspension system designed to carry the kind of load you'll pack for a serious outback trip. In this article we explain why it is important to consider fitting a new suspension system and what is involved. Suspension will certainly improve handling and hence saftey of driving with heavy loads and will dramatically improve the comfort of the ride. You can forget about corrugations with a good suspension system - you'll feel like you are gliding over them!
Article By: Damian Baker   Updated: 10 Mar 2008
Advertisement

 What is a Suspension System?

A%2bsuspension%2bsystem%2bfor%2ba%2b4WD
Click Image to Enlarge
 A suspension system is made up of many components that work together, to assist in softening the undesirable effects of the surface that a vehicle is travelling on. It works by delicately balancing these effects, whilst still providing the driver with the necessary road response for driving, steering and braking safely.

The two main aspects of a suspension system include the springs and shock absorbers that help control the suspension movement and the network of control rods, linkages and bushes that connect the wheels to the vehicle. This network is intricately designed to be rigid, whilst allowing vertical movement for the wheels.

Suspension gives all the wheels of the vehicle more chance of making contact with the surface especially when driving over bumpy uneven tracks. When you travel at speed, these effects are amplified and driving over smaller track imperfections could now be quite noticeable. A good suspension system will dramatically help suppress these effects.

Springs

Springs are an amazing device that can store energy when it’s altered from its original state. The spring can then release this energy when the load is removed and therefore returning it to its original state.

Springs are used in vehicles to help absorb changes in the terrain such as bumps or potholes that would otherwise jolt the vehicle. At the time a wheel enters a pothole for example, the spring releases energy at the time the wheel moves into the hole. The spring would then reabsorb this energy as the wheel exits the hole.

The spring rate is the measurement of a spring’s energy storage and is measured in terms of how much force is required to deflect it by a given amount.

Linear or Fixed-rate Behaviour

Is when the spring compresses at a constant rate or measurement to the increase in load placed upon it. For example, if 50kg were placed on a spring and it moved 1cm. The spring’s rate would be 50kgs/cm and an additional 50kg would result in a 2cm compression.

Rising-rate Behaviour

This spring rate is more exponential and is highly suitable for vehicle applications. For example, if 50kg were placed on a spring and it moved 1cm, it may take 150kg for it to move another centimetre. This spring behaviour may allow substantial compressions for medium loads but without fully compressing under heavy loads. The downside to a linear rate spring is that the spring may be rigid enough for heavy loads but too rigid for light loads.
Suspension%2blinkages
Click Image to Enlarge

Suspension Arms and Linkages

The suspension arms and linkages all form the core framework of the suspension system. They all work together to serve a common purpose and that’s to keep everything locked in place, whilst providing the support and leverage where necessary. The design of this framework is very important in ensuring that the suspension system operates as intended and in general, the linkages be sturdy and rigid as possible to eliminate undesired movement.

Shock Absorbers

Shock absorbers, also known as dampers or shockies are used to help slow down or dampen the movement of the suspension system. They consist of a piston moving inside an oil or gas filled tube and have various holes and spring loaded valves to control its resistance to movement. Unlike a spring, a shock absorber will keep moving with the force that was applied until the force has stopped or reached its energy limits. When this force is exhausted, the shock absorber will attempt to return to a fully extended position however the weight of the vehicle will limit this travel. In a correctly setup suspension system the shock absorber should be centered to the travel of the device.
Shock%2babsorber
Click Image to Enlarge

Pivot Points

Pivot points, which are joints between moving components need to have either restricted movement or be able to rotate freely in the desired way. There are two main types used in suspension systems and they are bushes and bearings.

Bushes

These components, also known as bushings are made of rubber, nylon or polyurethane and are generally used between joints where vibration needs to be absorbed. These bushes are used to help absorb road shock, reduce noise vibration and harshness. They are used to prevent steel on steel and minimise movement, which is the main cause of vibration transference, which in turn leads to steel degradation. Many of these bushes are designed to slightly flex to allow for a certain amount of linkage misalignment.

Bearings

Metal spherical bearings, also known as rose joints are commonly used to allow free rotation. They are more expensive than bushes; however, they provide a very stiff and solid joint. These components don’t offer the joint the impact absorption of rubber, nylon or polyurethane bushes.
Polyurethane%2bbushes
Click Image to Enlarge
Mixed%2bassortment%2bof%2bsteel%2bspherical%2bbearings
Click Image to Enlarge

Quarter-ellipticals

Quarter-elliptical leaf springs have been around for many years and were used in the Austin 7s of the 1920s. A quarter-elliptical suspension system is literally half of a semi-elliptical leaf spring and its use in vehicles is not that common anymore. These springs usually work by having one end, which is often the thickest part of the leaf-stack bolted to the chassis and the free end attached to the differential.
Quarter-elliptical%2bleaf%2bspring
Click Image to Enlarge

Semi-elliptical

This type of suspension is by far the most commonly used spring – especially in heavy vehicle applications such as trucks and trailers. In regards to passenger vehicles, it would be ideal to have a soft suspension for a comfortable ride. This is true to a degree, but unfortunately not very practical because a very soft suspension will compress too easy with large bumps and potholes. 4WDs that are going off-road will no doubt experience these conditions, so it’s vital to have a balance between comfort and rigidity. What is required is a rising-rate leaf spring that gets stiffer the more it is compressed. Extra helper leaves, which are normally straighter and smaller than the standard leaves is what achieves this. As the load increases, and the standard leaves become near parallel with the helper leaves, the helper leaves will then come into play to take some of the load.
Semi-elliptical%2bleaf%2bspring
Click Image to Enlarge

Parabolic

The parabolic leaf spring is a more modern version of the standard semi-elliptical leaf spring. This design consists of a thickness variation in the leaf which follows a parabolic arc. In other words, it’s thicker at the center and thinner towards the ends. The advantages of this system, is there is more contact between the springs at the ends and the center, providing less inter-leaf friction as they slide. Having less friction, results in a more supple and flexible spring that reacts smoother to small loads, whilst still retaining the stiffness needed to take heavier loads.
Parabolic%2bleaf%2bspring
Click Image to Enlarge

Advantages & Disadvantages of Leaf Springs

Below is a list of advantages and disadvantages in regards to leaf springs:

Advantages:

  • When the spring is attached to the axle and chassis, the spring itself can hold everything in place minimising the complications of additional linkages and support bars.

  • Friction as the leaves slide across each other, provides frictional resistance to movement which aides in stopping the spring bouncing out of control.

  • Leaf springs can be easily designed to take heavy loads

  • The simple design of the leaf spring system is not as expensive as other systems

Disadvantages:


  • The friction that is generated from inter-leaf sliding can also work against the intended use

  • As the spring gets older and rust starts to settle in, the springs don’t slide across each other as smoothly and therefore creating a stiffer spring

  • Leaf springs need to be well looked after for maintaining good performance
Leaf%2bspring
Click Image to Enlarge

What to Look For?

Below is a list of some of the things to look out for when choosing a quality leaf spring suspension system:
  • Tapered Leaf Ends - To reduce inter-leaf friction & to improve pressure distribution in the bearing area

  • Shot Peened & Scragged Tested - To ensure longevity and reduce stress

  • Leaf Inserts – Assists in a further reduction of friction

  • Bolt Clips & Military Wraps – This helps prevent leaf spread & provide extra safety

  • Bolt Clip Liners – Assists to reduce noise and friction.

  • Inter-Leaf Graphite Coating - Assists in a further reduction of friction
A%2bcoil%2bspring
Click Image to Enlarge

Main Advantages

Coil springs are very popular suspension systems in off road vehicles. Since a coil spring doesn't have the friction losses that a leaf spring does, a smooth and predictable suspension system can be designed. These springs are often mounted between a lower suspension wishbone and either the chassis or a chassis outrigger. In 4WD applications, the coil spring can work very well with a telescopic shock absorber, giving greater suspension values and clearance in true off-road conditions.
Lovells%2bcoil%2bsprings
Click Image to Enlarge

What to Look For

Below is a list of some of the things to look out for when choosing a quality coil spring suspension system.
  • Shot Peened - To relieve stress of the outer surface of the coil. The coil can then operate under higher fatigue & repeated load conditions to ensure longevity

  • Scragged for Quality Control – Scragging is achieved by compressing the coil beyond its yield point to set up residual stresses. Doing this will increase the elastic limit of the spring

  • Powder Coated – Helps resist corrosion. Also used for aesthetics

 Air Springs

With an air spring attached to a compressor, you get both a rising-rate spring with almost infinite adjustability. Air can be pumped into the spring or released to help level the vehicle depending on various driving conditions such as driving in rough terrain and driving with heavy loads. Automated air suspension systems are electronic and usually have these features:
  • Load monitoring

  • Automatic traction control

  • Automatic pre-set levels. (e.g. parallel to the road surface, including uneven loads)

4WD Applications

The advantage of using air springs especially in 4WDs is you can raise and lower the suspension at will. The vehicle can have a raised suspension dedicated for those uneven bumpy tracks and a lowered suspension for driving on the tar. Some 4WDs such as the latest Range Rovers have a more sophisticated system which can raise or lower each corner individually to keep the vehicle level over rough terrain.
Range%2bRover
Click Image to Enlarge

Air Spring Add-ons

An aftermarket option is the adjustable add-on air spring. These air systems can be installed to work with coil and leaf springs and can either be permanently connected to a mounted compressor or adjusted with a separate pump. These systems are relatively cheap and are designed to assist in levelling the vehicle when it’s heavily loaded.
Some%2bair%2bspring%2bproducts
Click Image to Enlarge

 Suspension Considerations

There are many things to think about before rushing out and buying a suspension upgrade.
Some of these considerations are outlined below:
  • Standard suspension supplied by the manufacturer is designed to carry the load of the vehicle in it's standard format. This may be 8 persons or 4 people and some luggage. Outback 4WD travellers generally carry 2 - 4 people, extra fuel, recovery equipment, water and the list goes on. This stuff is extremely heavy and not what the original manufacturer made the vehicle to carry.

  • Overloaded, under capacity suspension will not ride very well and is dangerous.

  • How will the set-up ride when the vehicle is unladen? Super heavy suspension may give a hard ride when unloaded but perfect when fully loaded for the big trip.

  • How will you be using the vehicle? If you only travel outback 4 weeks a year then you will need a system that will ride well in the city and have the flexibility to give good performance when you are outback.

  • When you change the springs or coils it is advisable to change the shock absorbers at the same time. If lifting your vehicle with new springs then longer travel shocks will be required.

  • Some vehicles will ride at a different height on each side of the vehicle. A lot of new suspensions system are designed with different heights in the springs and these are to go in the vehicle in a certain way.

  • Your ride and comfort are everything - do not skimp on your choice of suspension.
Before%2brear%2bspring%2binstallation%2b-%2b480mm%2bhigh
Click Image to Enlarge
Before%2bfront%2bspring%2binstallation%2b-%2b515mm%2bhigh
Click Image to Enlarge

After Coil Spring Installation:
After%2brear%2bspring%2binstallation%2b-%2b620mm%2bhigh
Click Image to Enlarge
After%2bfront%2bspring%2binstallation%2b-%2b590mm%2bhigh
Click Image to Enlarge

 Article Feedback

If you wish to Send Feedback please Logon Now

What Others have Posted

G&K : 16 Dec 07 13:06
Howdy! I'm new to the site in a contibutory mode but have accessed t...
Cram : 25 Oct 07 18:37
Hi everyone, well fresh back from our trip North. All went well exc...
Member - Straps (SA) : 14 Oct 07 21:03
Hi Gang, As the title says, I am after information and advice on su...
Lui.R. : 11 Oct 07 21:14
I own a 2001 holden frontera (auto) and would like to up grade the s...
selasticman : 28 Sep 07 15:06
G'day all, Just a quick question re ebay suspension; has anyone loo...

 Related Pages
Portable Fridges
The debate over which fridge is the best on the market is one of the most contested discussions in the camping recreation. In this article we look at the range of features and the major issues to consider when comparing brands and models. [Feature Story]
Accessories
Detailed articles on the complete list of vehicle accessories and equipment on today's market - includes basic essentials for weekend camping and must-have gear for setting up a 4WD for serious offroad use.
Bike Carriers
Using a recreational vehicle such as a 4WD is all about exploring places and enjoying yourself. Taking a push bike can provide you with the added advantage of exercise and exploring that little further in the nice open air.
Topics Index
Each Topic contains a range of detailed and useful articles on products, services and issues. This section is full of practical tips, ideas, photos and factual information.
Cargo Drawers
This Article looks at gearing up for a 4WD camping trip and the need to find a sturdy, compact storage solution that won't rattle, break or allow loose items to fly around the cabin. We look at cargo drawers and list the features you should look for.
Recovery Gear Needs
The majority of situations that will stop a 4WD from moving are tyre punctures or getting yourself bogged in mud or sand - and these can happen in the simplest of situations, and for no real fault of the driver.
Winches
All travellers should be capable and equipped for winching so in this article we will discuss the various winching methods and equipment on the market.
Vehicle Shower
Water is the single most precious commodity you need to carry for your trip. Although heavy, we need to carry it for drinking, cooking and washing. When it comes to personal hygiene during remote travels, we often scrimp on the luxuries and make do with a quick wash of the arm pits and other spots.
Driving Lights
If you plan to do any night driving in the outback then a strong reliable light source is a must. Bad weather, night driving and the possibility of stray animals all demand the need for a clear view of the road and the standard vehicle high beam is not enough.
Roof Racks, Luggage Trays & Boxes
In this article we look at the pros and cons of using the roof of your vehicle for storage when travelling; discuss what not to carry on your roof; provide some helpful packing hints and finally some useful buying tips with links to suppliers who sell roof rack luggage trays and storage systems.
HF Radio
HF Radios are a wise consideration if you intend to travel throughout remote regions of Australia. In this article we discuss the usefulness of HF radio in practical situations and explain the many featues and services avaialble to enhance your use of the equipment including links to suppliers and manufacturers.
UHF Radio
If you are considering a trip into Australia’s vast outback, then a UHF Radio is an important communications device to have. Besides the entertainment value, such as chatting with other travellers, this radio can be a valuable part of your contingency list.
Long Range Fuel Tanks
A large number of outback treks involve long distances between fuel outlets. Jerry cans are dangerous, difficult to store and not as convenient as a long range fuel tank. Fitting a long range fuel tank is a common modification and there are many good manufacturers.
Snorkel
Although significantly different, both petrol and diesel engines require a steady flow of air to operate. If the vehicle is not fitted with a snorkel, they do this by sucking air through the inner guard of the bonnet or just behind the grill. These open airways will also allow water to enter the engine if submerged - with disastrous results!
Water Tank
Water storage is a critical issue for all four wheel drivers. Not only do you need to carry large amounts of fresh water, you also need 2 alternate supplies in case of contamination from one source. We suggest a couple of small plastic jerry cans for backup but for the main supply, the best water carrying solution is a stainless steel water tank.
Bull Bars, Rails & Steps
A vehicle's bull bar, sides steps and rails are known as its "bar work". Some critics might suggest that bar work is not necessary but for people actually using their vehicles for offroad touring, the bar work provides critical strength and protection and should therefore be considered as essentials.
Aftermarket Seats
Unfortunately, car manufacturers don't always expect us to actually take our vehicles offroad - so when it comes to fitting out your vehicle for a major trip you replace your suspension to improve the ride so ... why not replace your seats?
HF Radio Installation
In this article, we discuss the procedures for installing a HF radio and the modifications that can be considered for a successful installation. We look at the different options and locations on the vehicle to mount the antenna base and provide some cabling and console tips to give that professional look.